-
MenuBack
-
Parts
-
-
ENGINE PARTS
-
CLUTCHES
-
-
-
-
-
EXHAUSTS, PERFORMANCE PARTS
-
-
-
PROTECTIONS & PORTAGE
-
-
ROOF BARS & RACKS
-
-
-
SKID PLATES & BUMPERS
-
-
-
VEHICLE GEAR
-
-
OFFROADING
-
-
ROPES, D-RINGS, JACKS
-
-
-
LOCKERS
-
-
-
WINCHES & MOUNT PLATES
-
-
-
SUSPENSION
-
-
-
-
SUSPENSION3
-
-
-
WHEELS & HUBS
-
-
WHEELS & ACCESSORIES
-
-
-
FREE-WHEELING HUBS
-
-
-
COMPRESSORS & ACCESSORIES
-
-
-
ROADTRIP
-
-
-
SNORKELS & PREFILTERS
-
-
-
-
NAVIGATION & COMMUNICATION
-
-
-
MANUFACTURERS
-
-
Préparations
-
-
Mercedes Sprinter
-
-
-
Volkswagen
-
-
-
Iveco
-
Man
-
Toyota
-
-
-
Ford
-
Land Rover
-
Dacia
-
-
An error occurred
Pair of safety locks for Renault Master, Opel Movano, Nissan NV400 2010+ and Iveco Daily 2014+ cabs
Assembly on door frame
1 pair of locks (1 x left / 1 x right) with 4 keys + Additional piece (B-pillar bolt stop)
Cylinder lock
OPERATING INSTRUCTIONS :
- Pressing the knob closes or opens the door.
- The knob locks automatically as soon as the deadbolt is completely unscrewed or screwed in.
- Turning the key locks the bolt position: closed or open.
INSTALLATION INSTRUCTIONS :
- Position the lock on the door frame. The distance between the lock case and column B should be approximately 3 mm.
- At latch height, push the rubber gasket between column B and the cabin lining.
- Position the lock so that the closed bolt pushes against the lining.
- Now you can mark the holes.
- Remove the lock and drill a pilot hole using a 3.2 mm bit.
- Secure the special tapping screws with a 4 mm Allen® key.
IMPORTANT ASSEMBLY INSTRUCTIONS :
After installation, close the door gently and make sure that the HEOSafe® lock box passes through the rubber seal without any problems.
For further information, please do not hesitate to contact us:
Oops, no compatibility information available for your vehicle
Please contact our customer support to check the compatibility of this product with your model.