An error occurred
Pair of security locks for Ford Transit cab 2000 - 2006
lockable button
Assembly on door frame
1 pair of locks (1 x left / 1 x right) with 4 keys
Key-operated / Locking with cylinder lock
OPERATING INSTRUCTIONS :
- Pressing the knob closes or opens the door.
- The knob locks automatically as soon as the deadbolt is completely unscrewed or screwed in.
- Turning the key locks the bolt position: closed or open.
INSTALLATION INSTRUCTIONS :
- Position the lock on the door frame. The distance between the lock box and column B should be approximately 3 mm.
- Position the lock in such a way that the closed bolt pushes against the lining.
- Now you can mark the holes.
- Remove the lock and drill a pilot hole with a 3.2 mm bit.
- Secure the special tapping screws with a 4 mm Allen® key.
IMPORTANT ASSEMBLY INSTRUCTIONS :
After installation, close the door gently and make sure that the HEOSafe® lock box passes through the rubber seal without any problems.
For any further information, we remain at your entire service:
An error occurred
Your vehicle is not listed? Contact our customer support