Français
English
- New
An error occurred
To see compatible parts
Add my vehicle
Rotopax Side and Top Mount Kit
RRAC112
€149.00
Tax included
Mount RotoPax Fuel, Water or Emergency/Storage Packs to the side or top of a Front Runner Slimline II Rack with this off-road tough Mounting Plate and adjustable tilt Side Mount Brackets. Rotopax brand Pack Mounts (RX-PM, RX-DLX-PM and RX-LOX-PM) must be used in conjunction and are SOLD SEPARATELY.
check_circle
En stock magasin ou fournisseur
This product is compatible?
Check compatibility
Mount RotoPax Fuel, Water or Emergency/Storage Packs to the side or top of a Front Runner Slimline II Rack with this off-road tough Mounting Plate and adjustable tilt Side Mount Brackets. Rotopax brand Pack Mounts (RX-PM, RX-DLX-PM and RX-LOX-PM) must be used in conjunction and are SOLD SEPARATELY.
Free up rack space and mount fuel and water to the side or top of a Slimline II Rack. The high strength steel Mounting Plate can hold either one (1) 15L/4 gallon or two (2) 7.5L/2 gallon RotoPax Fuel, Water or Emergency/Storage Packs on the top of the rack or using the Side Mount Brackets, off the side of the rack. The Side Mount Brackets hold the Mounting Plate and are height (50mm/1.96'')) and tilt (12.5 degree increments up to 25 degrees) adjustable. Allows for RotoPax Packs to be positioned to suit the vehicle profile and rack contents. Also allows the RotoPax Packs to be slanted when fitted to the side of a Front Runner load bed rack, so as not to protrude excessively from the vehicle. RRAC157 measures in at 480mm (18.9'') L x 250mm (9.8'') W x 20mm (0.8'') H, weighs 1,58kg (3.5lbs). Both the Side Mounting Plate and Side Mount Brackets are finished in the same durable, weather resistant black powder coating as the Slimline II Rack. Installation hardware and fitting instructions included. PLEASE NOTE: RotoPax Pack Mounts (RX-PM, RX-DLX-PM and RX-LOX-PM) must be used to secure RotoPax to the Front Runner Rotopax Side Mount. The RotoPax brand Pack Mounts are SOLD SEPARATELY.Note: For compatibility with the Slimsport or Slimpro Van Rack the RRAC182, is required. *sold separately
Consists of:1 x RotoPax Mounting Plate (RRAC105)1 x Pair of RotoPax Side Mount BracketsInstallation HardwareFitting InstructionsMaterials used:Black powder coated high strength steelProduct Dimensions:97mm (3.8) L x 480mm (18.9) W x 243mm (9.6) HWeight:2.88kg (6.4lbs)
Consists of:1 x RotoPax Mounting Plate (RRAC105)1 x Pair of RotoPax Side Mount BracketsInstallation HardwareFitting InstructionsMaterials used:Black powder coated high strength steelProduct Dimensions:97mm (3.8) L x 480mm (18.9) W x 243mm (9.6) HWeight:2.88kg (6.4lbs)
RRAC112
Data sheet
- Poids
- 3.5
- Adaptable to:
- 4x4, Fourgons & Pickups
Specific References
- EAN13
- 6009542238487
New
This product adapts to:
- all models of 4x4
- all models of Pickup Trucks
- all models of Vans